The Wyatt MBE-04 Magazine Short Action Box is designed to allow the hand loader to extend his rounds up to .150 longer. It incorporates a window and break-point to allow for wider ctg. case bodies such as the WSM’s and PRC’s. When we designed our action we used the Wyatt box
Outside length is 3.070″. Inside length is 2.995″.
What’s the big deal about a Follower Spring? A spring is a spring! Right? Not at all. No we did’t reinvent the wheel but the Spring Engineers at Lee Spring made some improvements that allow the springs to be tuned from front to back. Most people just slip their spring in place and call it good. If you have an understanding on how to adjust the springs tension you can eliminate those rounds that jump out of the box or don’t want to come out at all.
What’s the big deal about a Follower Spring? A spring is a spring! Right? Not at all. No we did’t reinvent the wheel but the Spring Engineers at Lee Spring made some improvements that allow the springs to be tuned from front to back. Most people just slip their spring in place and call it good. If you have an understanding on how to adjust the springs tension you can eliminate those rounds that jump out of the box or don’t want to come out at all.
RCM spent a lot of time designing the perfect follower. Eliminating sharp transition points is key in allowing the next round to align itself in the magazine without bind. Made from 6061-T6 aluminum the hard anodized. Pure quality from start to finish.
RCM spent a lot of time designing the perfect follower. Eliminating sharp transition points is key in allowing the next round to align itself in the magazine without bind. Made from 6061-T6 aluminum the hard anodized. Pure quality from start to finish.
RCM’s Long Action 20 MOA Rail is machined from 6061-T6 Aluminum and Hard Anodized per Mil-8625. It has the 20 MOA designed right in it to give you that extra long range capability. Both ends have 1/8 dowel pins pressed in them allowing a perfect and secure mount to our receiver. Also we had over sized 8-40, #15 Torx Head Screws cold forged to secure the rail down without any chance of coming loose. One of the best and most secure mounting systems on the market. Some old school snipers firmly believe that by bridging the front of the receiver to the rear with a rail will greatly reduce stress on the scope tube while shooting.
RCM’s 2 piece scope bases are machined from 6061-T6 Aluminum and Hard Anodized per Mil-8625. These bases have the 20 MOA designed right in them to give you that extra long range capability. The bases have 1/8 dowel pins pressed in them allowing them to locate perfectly on our receiver. Also we had over sized 8-40, #15 Torx Head Screws cold forged to secure the bases down without any chance of coming loose. One of the best and most secure mounting systems on the market.
RCM’s 2 piece scope bases are machined from 6061-T6 Aluminum and Hard Anodized per Mil-8625. These bases have the 20 MOA designed right in them to give you that extra long range capability. The bases have 1/8 dowel pins pressed in them allowing them to locate perfectly on our receiver. Also we had over sized 8-40, #15 Torx Head Screws cold forged to secure the bases down without any chance of coming loose. One of the best and most secure mounting systems on the market.
